A few days in the past, I confirmed y’all the jewellery drawer with the glass prime that I in-built my walk-in closet. It’s a reasonably large drawer with inside dimensions of 41 5/8″ x 15″.

And it has a glass countertop over it in order that all the things exhibits when the drawer is closed.

I had checked out every kind of choices for jewellery drawer inserts, from Amazon choices to {custom} choices. I had actually hoped to have one thing {custom} made for the drawer, however I in a short time realized that wasn’t going to be an possibility for me. I discovered one web site the place you may design your personal, however first, their {custom} choices solely went as much as 36″ vast. And if I’m going to spend cash on one thing {custom} made, it wanted to suit your complete drawer width.
However I began taking part in round with their on-line customizer simply to get an concept of the value of one thing like that. Let’s simply say I ended designing (i.e., I ended including compartments to the design) when the value surpassed $500. There’s simply merely no means I can justify paying over $500 for a custom-designed jewellery drawer insert after I’m simply storing cheap jewellery. If I had been a collector of superb jewellery, I may in all probability justify spending that a lot to show it. However actually, the one costly piece of jewellery I personal is my wedding ceremony ring. All the pieces else is simply cheap, enjoyable jewellery that I purchase at random locations–drug shops, Interest Foyer, Amazon, and so forth.–after I see one thing I like.
So then I believed that I may construct my very own compartments. That means, I may construct it to suit the exact dimensions of the drawer. So I picked up a number of of those poplar boards from House Depot. These are 2.5″ x 48″.

They usually’re 1/4″ thick, which I believed made them good for this undertaking.

My concept was to tear them down to three/4″ strips, lower them to the lengths wanted, and construct a grid contained in the drawer. Then I needed to stain the within of the drawer, in addition to the grid, in a really gentle, heat brown stain colour.

But it surely didn’t take lengthy for me to comprehend that I’d by no means get these items collectively good in a means that I used to be happy with. I attempted placing them along with scorching glue, however I couldn’t use sufficient glue to maintain them collectively. If I used an excessive amount of glue, it might squish out the perimeters, after which these items wouldn’t settle for stain. If I used too little, they wouldn’t maintain collectively. I additionally tried utilizing wooden glue, however that dries so slowly that I’d mess up the primary part as I began making an attempt to assemble the second part.

However this wasn’t a kind of tasks. With all the large tasks that also should be executed within the walk-in closet (like portray the cupboards and constructing the middle island), the very last thing I needed to do was spend my time doing this random time-consuming undertaking that I used to be about 95% certain I wouldn’t even be happy with when it was completed.
Again on-line I went. I’ve to confess that for about an hour final evening, I went again to the concept of a {custom} insert. I used to be truly very tempted when I discovered this firm that may do {custom} acrylic inserts for almost any function you may consider. There are occasions when paying a excessive worth for one thing is well worth the comfort to me. However once more, due to the dimensions of the drawer, I knew I’d be taking a look at a worth of a number of hundred {dollars}. I simply couldn’t make myself do it.
So final evening, I searched excessive and low on Amazon for inserts that I believed would possibly work in my drawer. I couldn’t discover the proper measurement (not stunning), however I lastly decided to go with this set of four in a light gray (affiliate hyperlink). Every set comes with 4 completely different grid sizes.

I knew that I needed two of the identical measurement since most of my earrings are fairly small. And I wasn’t certain what different measurement(s) I needed to make use of, so I ended up ordering two units. (I LOVE Amazon in a single day supply!! Hooray for fast gratification! I ordered earlier than I went to mattress, and it was on my doorstep after I awoke. 😀 )

The colour is barely darker than I had hoped, however they’re very nicely made and durable.

4 of them match into my drawer, and my plan is to paint match a pattern measurement of paint to the grey in order that I can paint the entire inside the drawer in the identical colour.

I’m truly fairly enthusiastic about how they appear! They’re not an ideal match, however it certain beats the heck out of paying over $500 for a {custom} insert.

Even with shopping for two units, I nonetheless paid means below $100 for them.

There’s a 1-inch hole on the entrance, however that doesn’t even present when the drawer is closed. In order that doesn’t trouble me in any respect.

And since I’ve 4 trays left over, I’m contemplating making an attempt to chop down one of many further trays (the grids are detachable) to fill within the further 3.5-inch house within the center to get a completely custom-made measurement and have the entire drawer, from left to proper, full of trays. I do not know if I can do it, however you might be sure that I’ll attempt!

Anyway, I’m very happy with how that is turning out. I feel as soon as I get the within of the drawer painted to match the trays, it’s going to look implausible! And naturally, I nonetheless plan so as to add tape lights contained in the drawer and contained in the necklace compartment as nicely.

I’m additionally nonetheless making an attempt to work out the small print of how I need to end off the necklace pull-out storage. Y’all had some nice concepts on that, so I’m nonetheless weighing the choices.
Trending Merchandise